HP 8360 - Manual (Page 276)

Peak RF Once
Function Group POWER, USER CAL
Menu Map
Description This appears in two locations: the POWER Tracking Menu
and the USER CAL Tracking . The operation is the same in
both locations.
This causes an instantaneous, one-time execution of the
peaking function when the synthesizer is in the CW or manual sweep
mode. It aligns the output filter (SYTM) so that its
is
centered on the RF output.
Programming Codes SCPI:
Analyzer: SHAK
See Also Auto Tracking, Peak RF Tracking Menu
“Optimizing Synthesizer Performance,” in Chapter 1.
Function Group POWER
Menu Map NONE
Description This lets you control the output power level of the
synthesizer. The synthesizer has different power leveling modes and
leveling points, and as such, the ( POWER key controls different
aspects of the power level (ALC) system.
The following is an explanation of power level operation in the
different ALC system configurations.
In Normal, Internal, the [ POWER LEVEL ) key controls the output
power level of the synthesizer directly. The attenuator (if present)
is controlled together with the complete range of the ALC system
to -20
When you press [ POWER LEVEL ), the active entry area displays:
POWER LEVEL : X . XX
where X represents a numeric value. The data display area indicates:
Operating and Programming Reference HP 8360
User’s Handbook