HP 8360 - Manual (Page 256)

Meter On/Off FM
Function Group (MOD)
Menu Map 4
Description This (Option 002 only) lets you display the frequency
deviation produced by the externally-generated frequency
modulation.
Programming Codes
See Also
SCPI: MEASure:FM?
Analyzer: NONE
(MOD), also see “FM” and “Modulation”.
Function Group MENU SELECT
Menu Map
Description This allows access to the modulation functions. The
following types of modulation are available:
AM Amplitude modulation is accepted from an external
source at the AM connector. The AM can be scaled
either linearly or exponentially. Synthesizers with
Option 002 also have the capability of internally
synthesizing amplitude modulation in sine, square,
triangle, ramp, or noise waveforms. Deep AM
(a distortion reduction mode) can be selected for
use when operating at a deep amplitude modulation
level.
FM
Operating and Programming Reference
Frequency modulation is accepted from an external
source at the FM connector. The FM can be either
AC-or DC-coupled. Synthesizers with Option 002
also have the capability of internally synthesizing
frequency modulation in sine, square, triangle, ramp,
or noise waveforms.
HP 8360
User’s Handbook