HP 8360 - Manual (Page 374)

Function Group SWEEP
Menu Map
Description This lets you set a sweep time for frequency sweeps or power
sweeps. The sweep time range is 10 ms to but the fastest sweep
time is constrained by the frequency span. The fastest possible sweep
can be determined automatically:
1. Press SWEEP (MENU), this reveals the sweep menu keys.
Select more , to scroll to the next page of the sweep menu.
Select Auto, to set the sweep time to automatic. The
synthesizer calculates the fastest possible calibrated sweep time for
any
sweep span.
Whenever you press the active entry area displays
the current sweep time and whether the sweep time is coupled to
the frequency span (far right hand side displays:
AUTO). If the word
AUTO is not displayed then the sweep time auto function is off.
Programming Codes SCPI: SWEep[:FREQ [time suffix] or
Analyzer: ST
See Also Power Sweep
“Power Level and Sweep Time Operation,” in Chapter 1.
“Programming Typical Measurements,” in Chapter 1.
Auto
Function Group SWEEP
Menu Map
Operating and Programming Reference HP 8360
User’s Handbook