HP 8360 - Manual (Page 269)

Module Menu
Function Group
Menu Map
Description This accesses the source module selection softkeys.
Millimeter-wave source modules can be connected to the synthesizer
source module interface connectors (there is one each on the front
and rear panels). These
give you the option of letting the
synthesizer automatically look at both connectors for source modules
or telling the synthesizer to look only at the front or at the rear
connector. You can also turn off module sensing completely.
Module Select AUTO Sets the synthesizer to automatic
selection of the source module
(selects the front connector if source
modules are present at both front and
rear connectors). This is the default
after preset.
Module Select Front Sets the synthesizer to select the source
module connected to the front panel
source module interface connector.
Module Select Rear Sets the synthesizer to select the source
module connected to the rear panel
source module interface connector.
Module Select None Disables source module sensing.
Programming Codes SCPI: NONE
Analyzer: NONE
See Also listed above.
HP 8360
User’s Handbook
Operating and Programming Reference