HP 8360 - Manual (Page 291)

Menu Map
Description This description is for the Pulse Menu for synthesizers with
Option 002. For the standard 002 Pulse Menu go to the
“Pulse Menu” heading that precedes this one.
This accesses the pulse modulation softkeys. These
engage external, internal, and scalar pulse modulation. They allow
you to define the rise time, and give access to the internal menu for
defining the parameters of the internally-generated pulse modulation.
Pulse
Toggles on and off the pulse modulation mode for
an external pulse source.
Pulse Scalar
Toggles on and off the internal scalar modulation
mode.
Pulse
Toggles on and off the internal pulse modulation
mode.
Int al Menu Gives access to the internal menu for defining
the parameters of the internally-generated pulse
modulation.
Pulse Rise Time Fast
Applies a fast rise pulse filter to both internal and
external pulse waveforms.
Rise Time Slow
Applies a slow rise pulse filter to both internal and
external pulse waveforms.
Pulse Rise Time Auto
Automatically applies the appropriate filter
(fast or slow) to both internal and external pulse
waveforms.
I n v e r t I n p u t Inverts the pulse input logic. When active, a V
input turns RF power off.
Programming Codes SCPI: NONE, see the individual listed.
Analyzer: NONE
See Also (MOD), also see “Modulation” and “Pulse”.
HP 8360
User’s Handbook Operating and Programming Reference P- 17