HP 8360 - Manual (Page 365)

Step Points
Programming Codes
SWEep:CONTrol:STATe
SWEep:CONTrol:TYPE
Analyzer: NONE
See Also Step Control Master, Step Menu
Step Dwell
Function Group FREQUENCY
Menu Map
Description This lets you set dwell times for points in the stepped
frequency mode of sweep operation. The dwell time for points in step
frequency sweep may range from 100
to The actual time
between points is the sum of dwell and phase lock times.
Select Step Dwell , then use the entry area to enter the desired
value.
Programming Codes SCPI: SWEep[:FREQ uency]:DWELl [time suffix] or
Analyzer: NONE
See Also Step Menu, Sweep Mode Step
Step
Function Group FREQUENCY
HP 8360
User’s Handbook Operating and Programming Reference