HP 8360 - Manual (Page 298)

R
Function Group
Menu Map
Description
Programming Codes
See Also
SYSTEM
8
This retrieves a front panel setting that was previously
stored in a SAVE register (1 through 8).
SCPI: *RCL
The above is an IEEE 488.2 common command.
Analyzer: where n= a numeric value from 0 to 9.
(SAVE), SCPI COMMAND SUMMARY
“Saving and Recalling an Instrument State,” in Chapter 1.
“Programming Typical Measurements,” in Chapter 1.
Ref Menu
Function Group SYSTEM
Menu Map
Description This reveals the in the frequency standard menu.
MHz Freq Auto, Automatically selects the frequency
standard to be used by the
synthesizer.
Standard Sets the synthesizer to accept an
external frequency standard as its
reference.
Freq Standard Sets the synthesizer to use its
internal frequency standard as its
reference.
HP 8360
User’s Handbook Operating and Programming Reference R-l