HP 8360 - Manual (Page 219)

FREQUENCY
Programming Codes SCPI: NONE, see listed above.
Analyzer: NONE
See Also listed above.
“Optimizing Synthesizer Performance” in Chapter 1.
Freq Follow
Function Group
Menu Map
Description
Programming Codes SCPI: NONE, see Fltness Menu
Analyzer: NONE
See Also Fltness Menu
“Optimizing Synthesizer Performance” in Chapter 1.
POWER
5
This facilitates the entry of correction values. The synthesizer
generates the corresponding CW frequency at the set power level as
you scroll the correction cells of the flatness array. An asterisk next
to the key label indicates that this feature is active.
FREQUENCY M E N U
Function Group FREQUENCY
Menu Map
Description This allows access to the frequency functions listed below.
Coupled
Freq Mult
When this feature is on, the center
frequency and the CW frequency is
kept equal. Changing either the center
frequency or the CW frequency causes the
other to change to the same value. An
asterisk next to the key label indicates that
this feature is active.
HP 8360
User’s Handbook
Sets the frequency multiplier value and
applies it to all frequency parameters.
Operating and Programming Reference