HP 8360 - Manual (Page 200)

Enter List
Description This lets you enter a dwell time for a frequency point in the
frequency list array. A frequency point must be entered before a
dwell value can be accepted, otherwise the following error message
appears:
ERROR: Must first enter a List Frequency. The rotary knob and
the up/down arrow keys let you scroll through the frequency points
available to change the default dwell values. The range of values is
to An asterisk next to the key label indicates that this
feature is active.
Programming Codes NONE,see List Menu
See Also List Menu
“Optimizing Synthesizer Performance” in Chapter 1.
Enter List Freq
Function Group FREQUENCY
Menu Map
Description This lets you enter a frequency point into the frequency list
array. The frequency list may contain as few as one and as many as
801 points. The order frequencies are entered is the order they are
listed. Additions to an existing list are placed as indicated by the
active entry arrow. The rotary knob and the up/down arrow keys let
you scroll through the frequencies points. An asterisk next to the key
label indicates that this feature is active.
Programming Codes SCPI: NONE, see
List Menu
See Also List
Menu
“Optimizing Synthesizer Performance” in Chapter 1.
HP 8360
User’s Handbook
Operating and Programming Reference