Sweep mode step – HP 8360 User Manual
Page 372
Sweep Mode
Programming Codes
FREQuency:MODE
SWEep[:FREQ uency]:GENeration
Analyzer: NONE
See Also
CONNECTORS,
Manual Sweep,(SINGLE),
“Programming Typical Measurements,” in Chapter 1.
Sweep Mode Step
Function Group
Menu Map
Description
Programming Codes
See Also
SWEEP
7
This
activates the stepped frequency step mode. In this
mode, the synthesizer steps from the start frequency to the stop
frequency, by the designated frequency step size. Manual, continuous,
and single sweeps can be performed in this mode. An asterisk next to
the key label indicates that this feature is active.
FREQuency:MODE
SWEep[:FREQ uency]:GENeration
Analyzer: NONE
Manual Sweep,(SINGLE), Step Swp Menu
“Using Step Sweep,” in Chapter 1.
Operating and Programming Reference
HP 8360
Handbook