HP 8360 - Manual (Page 255)

Meter Adrs
Function Group SYSTEM
Menu Map
Description In cases where the synthesizer is capable of acting as a controller
to an HP
power meter, this enables you to set the
programming address of the power meter. The address value can
be set from 0 to 30, with the factory default address set at 13. The
address value is stored in non-volatile memory.
Programming Codes SCPI: DIAGnostics:INSTrument:PMETer:ADDRess
Analyzer: NONE
See Also Menu
“Optimizing Synthesizer Performance,” in Chapter 1.
“INSTALLATION,” Chapter 3.
Meter On/Off AM
Function Group
Menu Map
Description
Programming Codes
See Also
4
This (Option 002 only) lets you display the value of the depth
of the externally-generated amplitude modulation.
SCPI: MEASure:AM?
Analyzer: NONE
also see “AM” and “Modulation”.
HP 8360
User’s Handbook Operating and Programming Reference