HP 8360 - Manual (Page 246)

List Mode Pt Trig
Ext
Function Group
Menu Map
Description
Programming Codes
See Also
FREQUENCY
2
This lets you set the trigger point to be an external hardware
trigger. When the synthesizer receives an external hardware trigger,
it steps to the next frequency point of the frequency list, provided
the synthesizer is in sweep list mode.
SCPI:
LIST:TRIGger:SOURce
Analyzer: NONE
List Menu, Trig Menu, Sweep Mode List
“Creating and Using a Frequency List,” in Chapter 1.
( L O C A L )
Function Group
Menu Map
Description
Programming Codes
See Also
INSTRUMENT STATE
NONE
This lets you cancel remote operation and return the
synthesizer to front panel operation. The front panel keys are
deactivated when the synthesizer is operated remotely. If the external
controller executes a LOCAL LOCKOUT command, pressing the
key does not return the synthesizer to front panel control.
SCPI: LOCAL
Analyzer:
LOCAL
NONE
“Getting Started Programming,” in Chapter 1.
“Programming Typical Measurements,” in Chapter 1.
HP 8360
User’s Handbook
Operating and Programming Reference