HP 8360 - Manual (Page 436)

6. Refer to Figure 3-4. Remove the inner slide assemblies from the
outer slide assemblies.
7. To secure the side covers in place, mount the inner slide assemblies
to the instrument with the screws provided.
8. With the appropriate hardware, install the outer slide assemblies
to the system enclosure.
9. Lift the synthesizer into position. Align the inner and outer slide
assemblies and slide the instrument into the rack. Realign the
hardware as needed for smooth operation.
MOUNTING HARDWARE
F O R H P
SYSTEMS ENCLOSURES
MOUNTING HARDWARE
F O R N O N - H P
SYSTEMS ENCLOSURES
Figure 3-4. Chassis Slide Kit
3-12 INSTALLATION Specifications