HP 8360 - Manual (Page 146)

Address
Function Group
Menu Map
Description
Programming Codes
See Also
SYSTEM
8
The 8360 Adrs lets you change the
HP-IB address of the
synthesizer. Enter the address desired using the numeric entry keys
or the up/down arrow keys. The address value may be set between
0 and 30. The synthesizer stores the address value in non-volatile
memory. The default address of the synthesizer is
19.
SCPI: SYSTem:COMMunicate:GPIB:ADDRess
Analyzer: NONE
Connectors,
HP-IB Menu
“Getting Started Programming,” in Chapter 1.
“Programming Typical Measurements,” in Chapter 1.
Adrs Menu
Function Group
SYSTEM
Menu Map
Description This accesses the HP-IB address menu.
Meter Adrs Controls the system power meter address.
8360 Adrs Can control the synthesizer’s address, depending
on the setting of the rear panel HP-IB switch.
P r i n t e r A d r s Controls the system printer address.
HP 8360
User’s Handbook
Operating and Programming Reference A-l