HP 8360 - Manual (Page 301)

Save Lock
Function Group SYSTEM
Menu Map
Description This lets you disable the save function. It prohibits the
saving of the present instrument state into a save/recall memory
register. If this function is active, an error message is displayed. An
asterisk next to the key label indicates that this function is active.
Programming Codes
SYSTem:KEY:ENABle
Analyzer: SHSV locks the registers, SHRC unlocks the registers.
See Also Security Menu
“Saving and Recalling an Instrument State,” in Chapter 1.
“Programming Typical Measurements,” in Chapter 1.
Save User Preset
Function Group SYSTEM
Menu Map
Description This lets you store the present state of operation to be used
as the PRESET state. Set the synthesizer to the desired operating
conditions. Select Save User Preset . The display shows:
- -
User Defined Preset Saved
To activate this stored information, you must set the preset mode to
User.
Programming Codes SCPI:
Analyzer:
NONE
See Also Preset Mode User
“Changing the Preset Parameters,” in Chapter 1.
Operating and Programming Reference HP 8360
User’s Handbook