HP 8360 - Manual (Page 46)

Saving and
Recalling an
Instrument State
The save/recall registers store and access a previously set instrument
state. For example, set the synthesizer to sweep from 3 to 15
at
a -10 power level, with markers 1 and 2 set at 4.5 and 11.2
Press [START)
Press (STOP)
P r e s s ( P O W E R I - ]
Press (MARKER).
Select Marker Ml
Select Marker
To save this instrument state in register 1, press (SAVE) To verify
that the synthesizer has saved this state:
Press (PRESET).
Press (RECALL)
Press [MARKER).
The active entry area displays:
RECALL REGISTER: RECALLED
Notice the sweep end points, power level, and the asterisks next to
the marker 1 and 2 key labels.
You can save instrument states in registers 1 through 8. Register
0 saves the last instrument state before power is turned off. When
power is turned on, register 0 is automatically recalled.
1-16 Getting Started Basic