HP 8360 - Manual (Page 257)

On/Off
Pulse Pulse modulation is accepted from an external
source at the PULSE connector. In addition, pulse
modulation can also be internally generated. The
pulse is adjustable in standard synthesizers with
1.0 resolution. Synthesizers can also produce
a 27.778 square wave for use with HP scalar
network analyzers. Synthesizers with Option 002
generate a synthesized pulse that is adjustable with
25 ns resolution.
Additional information is available under “Modulation”, or refer to
the type of modulation by name (AM, FM, Pulse.)
See Also “Modulation”
On/Off AM
Function Group
Menu Map 4
Description This (Option 002 only) lets you output the
generated amplitude modulation waveforms to the rear panel
AM/FM OUTPUT connector. When scaled linearly at
the
maximum output voltage is V and the minimum output voltage is
- 1 v .
Programming Codes
See Also
HP 8360
User’s Handbook
MODulation:OUTput:SOURce AM
MODulation:OUTput:STATe
Analyzer: NONE
[MOD), also see “AM” and “Modulation”.
Operating and Programming Reference M-l 1