HP 8360 - Manual (Page 249)

Function Group MENU SELECT
Menu Map
Description This allows access to the marker functions.
Markers Causes the synthesizer to display markers as an
amplitude pulse.
Delta Marker
Delta Mkr Ref
Changes the synthesizer’s center frequency to
the value of the most recently activated marker.
Display the frequency difference between the
active marker and the marker designated by the
Delta Mkr Aef .
Reveals the in the delta marker
reference menu.
Sweep
Marker Ml
Marker
Marker
Marker
Marker
Markers Off
Causes the synthesizer to sweep from Ml to
Makes Ml frequency the active function.
Makes frequency the active function.
Makes frequency the active function.
Makes frequency the active function.
Makes frequency the active function.
Turns off all markers.
Changes the synthesizer start and stop
frequencies to the values of Ml and
The markers are functional whenever an asterisk appears next to the
key label, but only one marker can be active at a time. The active
marker is indicated in the active entry area.
See Also listed above.
“Marker Operation,” in Chapter 1.
“Programming Typical Measurements,” in Chapter 1.
HP 8360
User’s Handbook
Operating and Programming Reference