Gasboy CFN Series Diagnostic Manual - Manual (Page 293)

0021 8-1
Section 8
STANDALONE RECEIPT PRINTER
GENERAL INFORMATION
The Standalone Receipt Printer is used for generating receipts in the building where the GASBOY
Console is located. The printer can only be used in conjunction with a Console. There are two
models of standalone receipt printer currently supported: a Star Receipt Printer and an Epson
Receipt Printer. Since the Star printer is the one currently being shipped with new orders, it is
presented first in this section. The Epson exists with older systems and that information is
presented later in this section.
STAR PRINTER
The Star printer is supplied in one of three configurations: RS-422 Serial, RS-232 Serial, or
Parallel. The exterior of the printer is identical in all three configurations except for the connector.
The Star printer is connected directly to the console via the RS-422 port labeled Receipt Printer or
the port labeled Printer (RS-232 and parallel). If a PIN Pad is used, it is connected to the console
separately from the printer (see the PIN Pad section for details on the Verifone PIN Pad).
Layout