Jumpers, Display type (c05375 only), Reader type – c05375 – Gasboy CFN Series Diagnostic Manual User Manual

Page 133: Ram/program type (c05375 only), Switches, S1 - reset switch, S2 - miscellaneous switches

Text mode
Original mode

Island Card Reader

03/19/04

4-17

Jumpers

Jumpers on the CPU PCB are used for very basic configurations of the PCB and usually do not
need to be set in the field.

Display Type (C05375 only)

Reader Type – C05375

Reader Type – C05857

RAM/Program Type (C05375 only)

Switches
S1 - Reset Switch
The Reset switch starts a hardware and software reset of the
CPU PCB. The S2 switch settings are read when a reset
occurs (and at power up). This switch should be pressed
whenever switch settings are changed while power is on.

S2 - Miscellaneous Switches
These switches are used to set the basic configuration of the ICR. They are software dependent
(the version of software may change the nature of the switch).