KEYENCE Visual KV Series User Manual
Page 338
7.2 Serial Communication
3-314
7
Chapter 7 Serial Communication
■ Writing preset value of high-speed counter comparator CTC
Changes the preset value of the specified high-speed counter comparator CTC.
Command: WS_CTCn_ddddd
New preset value (00000 to 65535: in decimal)
High-speed counter comparator No.
Response: OK
■ Writing into DM
Writes data into the specified data memory.
Command: WR_DMnnnn_ddddd
New current value (00000 to 65535: in decimal)
Data memory No.
Response: OK
■ Writing into TM
Writes data into the specified temporary data memory. TM30 and TM31 are read-
only memories, so values cannot be written to them.
Command: WR_TMnn_ddddd
New current value (00000 to 65535: in decimal)
Temporary data memory No. (00 to 29)
Response: OK
■ Forcing relay ON
Forces the contact of the specified relay to ON.
Command: ST_nnnnn
Relay No.
Response: OK
■ Forcing counter contact ON
Forces the contact of the specified counter to ON.
Command: ST_Cnnn
Counter No.
Response: OK
■ Forcing timer contact ON
Forces the contact of the specified timer to ON.
Command: ST_Tnnn
Timer No.
Response: OK
■ Forcing relay OFF
Forces the contact of the specified relay to OFF.
Command: RS_nnnnn
Relay No.
Response: OK
■ Forcing counter contact OFF
Forces the contact of the specified counter to OFF.
Command: RS_Cnnn
Counter No.
Response: OK
■ Forcing timer contact OFF
Forces the contact of the specified timer to OFF.
Command: RS_Tnnn
Timer No.
Response: OK
KVNKA Chap 07.p65
08.3.11, 0:11 PM
314