Metrohm tiamo 2.4 (process analysis) - Manual (Page 706)

5.6 Commands
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
690 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
Window
A range (window) can be defined on the measured value axis, on the vol-
ume axis or on the time axis. The break point evaluation will only be car-
ried out in the defined window. Only the first break point in the defined
window will be recognized.
Selection Measured value | Volume | Time | off
Default value off
Lower limit
Value for the lower limit of the window.
Window = Measured value
Input range
-2000.0 - 2000.0 mS/cm
Default value -2000.0 mS/cm
Window = Volume
Input range
0.00000 - 9999.99 mL
Default value 0.00000 mL
Window = Time
Input range
0 - 999999 s
Default value 0 s
Upper limit
Value for the upper limit of the window.
Window = Measured value
Input range
-2000.0 - 2000.0 mS/cm
Default value 2000 mS/cm
Window = Volume
Input range
0.00000 - 9999.99 mL
Default value 9999.99 mL
Window = Time
Input range
0 - 999999 s
Default value 999999 s
5.6.3.3.6.8 MET Cond - Additional measured values
Tab: Method ▶ MET Cond ▶ Properties... ▶ Additional measured values
Command name
Name of the command.
Entry 25 characters