Metrohm tiamo 2.4 (process analysis) - Manual (Page 1509)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 1493
selected so that a safe movement across the entire rack is possible at any
time.
Input range 0 - 100 mm
Special position
Special position for Lift 1. This additional definable position can be used
e.g. during pipetting so that the tip is just immersed in the sample solu-
tion.
Input range 0 - 100 mm
6.12.3.8 Properties - Special beaker (774)
Dialog window: Configuration ▶ Rack data ▶ Properties
Special beaker
Shows the number of the special beaker for the selected rack.
Rack position
Shows the number of the rack position for the special beaker.