Metrohm tiamo 2.4 (process analysis) - Manual (Page 1637)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
7 Devices
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 1621
Entry xxx.xxx.xxx.xxx
Controller ID
Number of the controller in the system. This number has to be unambigu-
ous over all controllers of the system (IO controller and stepping motor
controller).
Entry Digit
Is inserted as first number (x) of the port name as in
DigIn_x_z_y.
7.20.4 Properties - Digital inputs
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ Digital inputs
All recognized inputs are automatically listed in a table on the Digital
inputs tab. The port designation can be changed for each digital input.
Port
Display of the internal description of the port.
Port description
Display of the port description.
Port specification
Shows the port specification.
Type
Display of the port type.
Delayed edge
Indication of the edge type, i.e. rising or falling.
Delay time
Time that has to elapse before the input signal on the rising or falling
edge is recorded.
Invert signal
If this check box is activated, then the evaluation of the input signal is
inverted.
[Edit]
Opens the Properties Digital input dialog in order to edit the selected
port.
[Port description]
Opens a menu in order to import or export port designations.