Metrohm tiamo 2.4 (process analysis) - Manual (Page 65)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 General program functions
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 49
Identifica-
tion Description Commands
.OVS Value of the output at the start of
the command.
Direct controller/2-point control-
ler command status: 1 = active,
0 = inactive
PID/PWM: -100 to 100% (value of
the analog output or the pulse
frequency)
CONTROL
.PK{x}.ABS Absorbance of the peak x (1 - 9)
in mAU MEAS Spec
.PK{x}.TRN Transmission of the peak x (1 - 9)
in % MEAS Spec
.PK{x}.CNT Intensity of the peak x (1 - 9) in
counts MEAS Spec
.PK{x}.CNR Intensity of the peak x (1 - 9) in
the reference spectrum in counts MEAS Spec
.PK{x}.CND Intensity of the peak x (1 - 9) in
the dark spectrum in counts MEAS Spec
.PK{x}.WVL Wavelength of the peak x (1 - 9)
in nm MEAS Spec
.PK{x}.SAT Detector with peak x (1 - 9) satu-
rated: 1 = saturated;0 = not
saturated MEAS Spec
.RAN Current absolute rotation angle of
the rack in ° in relation to the axis
of the selected tower (entry when
exiting the command) MOVE
.RE{x}.DRC Correlation coefficient for mean
dosing rate in window x (1 - 9) STAT
.RE{x}.DRS Standard deviation for mean dos-
ing rate in window x (1 - 9) in
mL/min STAT
.RE{x}.DRT Mean dosing rate in window x (1
- 9) in mL/min STAT
.RE{x}.RWL Lower limit of the evaluation win-
dow x (1 - 9) in s STAT