Metrohm tiamo 2.4 (process analysis) - Manual (Page 1666)

7.20 IO controller
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1650 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
Input parameters
Tolerance range
for control task = digestion unit
Input range
0 - Smallest distance between setpoint value
and 0% mapping or 100% mapping 'Map-
ping unit of the input or of the calculated
value'
Default value 1.0 'Mapping unit of the input or of the cal-
culated value'
for control task = free controller
Input range
0 - Smallest distance between setpoint value
and 0% mapping or 100% mapping 'Map-
ping unit of the input or of the calculated
value'
Default value 1 'Mapping unit of the input or of the calcu-
lated value'
Working range
for control task = digestion unit
Input range
0 - Smallest distance between setpoint value
and 0% mapping or 100% mapping 'Map-
ping unit of the input or of the calculated
value'
Default value 40.0 'Mapping unit of the input or of the cal-
culated value'
for control task = free controller
Input range
0 - Smallest distance between setpoint value
and 0% mapping or 100% mapping 'Map-
ping unit of the input or of the calculated
value'
Default value 10 'Mapping unit of the input or of the calcu-
lated value'
Output parameters
PMW period duration
for control task = digestion unit
Input range
0 - 9,999.0 s
Default value 1.0 s