Metrohm tiamo 2.4 (process analysis) - Manual (Page 225)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 209
Read
on | off (Default value: on)
Activates/deactivates the permission to open the database. The database
can only be displayed but not modified (records cannot be deleted or
reprocessed).
Edit
on | off (Default value: off)
Activates/deactivates the permission to edit the database. Records can be
modified or deleted.
NOTE
If access for editing is activated, then access rights for reading will also
automatically be activated. If access for reading is deactivated, then
access rights for editing will also automatically be deactivated.
4.3.5.4 Database properties - Backup
Tab: Database ▶ File ▶ Database manager... ▶ Database manager ▶ [Proper-
ties] ▶ Properties - Database - 'Database name' ▶ Backup
Definition of backup monitoring and automatic backups.
Backup monitoring
on | off (Default value: off)
Activates/deactivates the backup monitoring for the selected database. If
the Backup monitoring check box is activated, then the Next backup
field in the database table will be highlighted in red when the interval
time elapses.
Last backup
Shows the date and time of the last database backup.
Next backup
Date on which the next backup must take place. This date can be selected
by clicking on in the Select date dialog window.
Entry Date selection
Default value Last backup + 1 month
Interval
Entry of the interval for the backup monitoring. After each automatically
or manually triggered backup, the interval entered here will be added