Metrohm tiamo 2.4 (process analysis) - Manual (Page 1419)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 1403
Concentration (unit)
Concentration unit of solution.
Entry 10 characters
Selection mol/L | mmol/L | µmol/L | g/L | mg/L | µg/L |
mg/mL | ppm | % | mEq/L
Default value mol/L
Comment
Remarks about the solution (e.g. batch number).
Entry 24 characters
Production date
Date on which the solution was produced. This date can be edited only
for manually added solutions by pressing .
Selection Date selection
Monitor solution
on | off (Default value: off)
If this option is activated, then the working life of the solution will be
monitored.
Working life
Working life of the solution in days. If a value is entered here, then the
Expiry date will be automatically adapted.
Input range 0 - 999 days
Default value 999 days
Expiry date
Expiry date of the solution. The date can be selected by clicking on in
the Select date dialog window. After a date has been entered the
Working life will be automatically adapted.
Selection Date selection
Message
The message options can only be edited if monitoring is switched on.
Message by e-mail
on | off (Default value: off)
If this option is enabled, the message is sent to the address defined under
[E-mail]. The message is sent in text format.