Metrohm tiamo 2.4 (process analysis) - Manual (Page 1327)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 1311
Functions
Moves the selected line up.
Moves the selected line down.
[New]
Opens the dialog window Stepping motor # in order to edit a new line
(see Chapter 5.6.11.6.4, page 1311).
[Properties]
Opens the dialog window Stepping motor # in order to edit the
selected line (see Chapter 5.6.11.6.4, page 1311).
[Delete]
Deletes the selected line.
5.6.11.6.4 STEPPING MOTOR - Stepping motor #
Dialog: Method ▶ STEPPING MOTOR ▶ Stepping motor ▶ Properties ▶ STEPPING
MOTOR - Stepping motor #
Port description
Selection of the stepping motor. The stepping motors of the selected
device are available. No port can be selected if not defined is selected in
the Device name field.
Type
Shows the type of stepping motor.
Function
Action
Action that the stepping motor is to carry out.
Selection 'empty' | Reference position | Relative posi-
tion | Absolute position | End position | Reset
Default value 'empty'
Reference position
Move to the reference position of the stepping motor.
Relative position
Move to a relative position, whereby the stepping motor moves rela-
tive to the current position by the value defined under Distance/
Angle.