Metrohm tiamo 2.4 (process analysis) User Manual
Page 1640
![background image](/manuals/586371/1640/background.png)
7.20 IO controller
■■■■■■■■■■■■■■■■■■■■■■
1624
■■■■■■■■
tiamo 2.4 (for Process Analysis)
Only active and editable for the port types Level detector and Leak
detector.
Selection
Input signal | Invertet input signal
Default value
Input signal
Signal processing
Delayed edge
The input signal will only be recorded with a delay time on the rising or
falling edge.
Selection
ascending | descending
Default value
descending
Delay time
Time that has to elapse before the input signal on the rising or falling
edge is recorded.
Input range
0 - 214,783,647
Default value
0
Invert signal
on | off (Default value: off)
If this check box is activated, then the input signal received will be inver-
ted.
Message
Only active and editable for the Type = Level detector.
Message by e-mail
on | off (Default value: off)
The message is sent to the address defined under [E-mail...] if this check
box is activated. The message is sent in text format.
[E-mail...]
[E-mail...] opens the Send e-mail window (see Chapter 2.6.1, page 93).
Acoustic signal
on | off (Default value: off)
If this check box is activated, an acoustic signal will be emitted in addition
to the message.
Regardless of which Action has been selected, the corresponding mes-
sage will also be displayed on the Messages tab of the Live display (see
Chapter 3.8.4, page 181).