Metrohm tiamo 2.4 (process analysis) - Manual (Page 1700)

8.4 Manual control - Functions
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1684 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
Rack position
Assigning the current rack position to a specific special beaker.
Current position
Shows the current rack position.
Special beaker
Selection of the special beaker to which the current rack position is to be
assigned.
Input range 1 - 16
Default value 1
[Assign]
Triggers assignment. During the assignment the cursor is displayed as
hourglass.
Lift position
Assigning the current lift position to a specific special position.
Current position
Shows the current lift position in mm.
Work position for
If this option is selected, the current lift position is assigned to the work
position of the tower or a special beaker or to an external position of the
robotic arm.
all except 730
Selection
Tower | External positions
Default value Tower
730 only
Selection
Tower 1 + 2 | Special beaker 1 - Special
beaker 16 | External 1 - External 4
Default value Tower 1 + 2
Rinse position for
If this option is selected, the current lift position is assigned to the rinse
position of the tower.
all except 730
Selection
Tower | External positions
Default value Tower