Metrohm tiamo 2.4 (process analysis) - Manual (Page 1318)

5.6 Commands
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1302 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
5.6.11.3.3 DIGITAL IN - Stop criteria
Tab: Method ▶ DIGITAL IN ▶ Stop criteria
Command name
Name of the command.
Entry 25 characters
Stop criteria
Definition of possible stop criteria. The stop criterion that is reached first
leads to the cancellation of the command.
Maximum run time
on | off (Default value: off)
Check box for activation/deactivation of the stop criterion Maximum run
time. The command is canceled when the maximum run time has been
reached.
Input range 0 - 9,999.9
Default value 0
Selection min | s
Default value min
NOTE
The run time is also stopped if the method is interrupted with [Hold].
Condition
on | off (Default value: off)
Check box for activation/deactivation of the stop criterion Condition.
Expression for the condition(s) that can be created or edited with the for-
mula editor after clicking on or by double-clicking in the text field (see
Chapter 2.4, page 30).
The condition is checked continuously; if it is fulfilled (evaluation of the
formula yields the result 1 = true), then the command will be canceled.
Entry 1,000 characters
Default value empty