Metrohm tiamo 2.4 (process analysis) - Manual (Page 1467)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 1451
￭ Limit values
Definition of the limit value monitoring for outliers and the coefficient
of determination.
￭ History
Display of the last 10 calibration values.
6.8.3.2 Properties - Colorimetric sensors
Tab: Configuration ▶ Colorimetric sensors ▶ Edit ▶ Properties... ▶ Colorimetric
sensor
Name
Name of the sensor.
Entry 24 characters
Comment
Possibility to enter remarks about the sensor.
Entry 24 characters
Default value 'empty'
6.8.3.3 Properties - Calibration data
Tab: Configuration ▶ Colorimetric sensors ▶ Edit ▶ Properties... ▶ Calibration
data
Wavelength
Wavelength at which the calibration of the instrument has been carried
out.
Input range 100.0 - 2000.0 nm
Default value 400.0 nm
c0
Calibration coefficient of zero order.
Input range -1E+99 - 1E+99 (max. 10 significant places)
Default value 0
c1
Calibration coefficient first-order.
Input range -1E+99 - 1E+99 (max. 10 significant places)
Default value 0
c2
Calibration coefficient second-order.
Input range -1E+99 - 1E+99 (max. 10 significant places)
Default value 0