Metrohm tiamo 2.4 (process analysis) - Manual (Page 187)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Workplace
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 171
Copy automatically into next line
Method
on | off (Default value: on)
If this option is activated, then the content of this field will automatically
be filled with the content of the previous line when a new sample data
line is created.
ID1 … ID3
on | off (Default value: on)
If this option is activated, then the content of this field will automatically
be filled with the content of the previous line when a new sample data
line is created.
ID4 … ID16
on | off (Default value: off)
If this option is activated, then the content of this field will automatically
be filled with the content of the previous line when a new sample data
line is created.
Sample size
on | off (Default value: off)
If this option is activated, then the content of this field will automatically
be filled with the content of the previous line when a new sample data
line is created.
Unit
on | off (Default value: on)
If this option is activated, then the content of this field will automatically
be filled with the content of the previous line when a new sample data
line is created.
Sample position + 1
on | off (Default value: on)
If this option is activated, then the content of this field will automatically
be incremented by +1 when a new sample data line is created.