Metrohm tiamo 2.4 (process analysis) - Manual (Page 68)

2.4 Formula editor
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
52 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
Identifica-
tion Description Commands
.TC.MIN Minimum temperature coefficient
of the conductivity in %/°C MET Cond, MEAS
Cond, MEAS TC
Cond
.TC.MAX Maximum temperature coefficient
of the conductivity in %/°C MET Cond, MEAS
Cond, MEAS TC
Cond
.TC.TSTART Start temperature in °C MET Cond, MEAS
Cond, MEAS TC
Cond
.TC.TSTOP Stop temperature in °C MET Cond, MEAS
Cond, MEAS TC
Cond
.TITER Titer value of the solution used
for the command DET, MET, SET,
KFT, STAT,
STDADD dos,
STDADD auto,
ADD, DOS, LQH
TMF Transmission factor (dimension-
less) MEAS TMF
.TOL Tolerance within which a mea-
sured peak can be assigned to a
calibration wavelength. CAL Spec
.TOU Timeout status: 1 = Max. wait-
ing time expired; 0 = Max.
waiting time not expired RECEIVE, TRANS-
FER, SCAN
.UNI Mapping unit which is defined in
the configuration for an IO port
(Text) ANALOG IN,
ANALOG OUT
.VAL Value of the command variables
(optional, i.e. Command
name.Port name' = Command
name.Port name.VAL') (Num-
ber). The value returned is the
value after the ending of the
command. ANALOG IN,
ANALOG OUT,
DIGITAL IN, DIGI-
TAL OUT