Metrohm tiamo 2.4 (process analysis) - Manual (Page 1296)

5.6 Commands
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1280 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
Shimadzu
Entry
ID08
Max. waiting time
Maximum time during which the balance data is waited for.
Value
Input range 0.0 - 9999.9
Default value 1
Device
Selection min | s
Default value min
5.6.10 Various commands
5.6.10.1 Various commands - Overview
Menu item: Method ▶ Insert ▶ New command...
Various commands that can be used independently of the connected
instruments.
The following commands can be selected:
￭ REQUEST
Scans sample data.
￭ CALL
Calling tracks (subprograms).
￭ LOOP
Multiple execution of a command sequence.
￭ WAIT
Stops the method run.
￭ SEQUENCE
Combines several commands to one command.
5.6.10.2 REQUEST
5.6.10.2.1 REQUEST - Overview
Dialog window: Method ▶ REQUEST ▶ Properties... ▶ REQUEST - 'Command
name'
Command for requesting sample data during the method run. The
data can either be entered manually or sent by a peripheral device (bal-
ance, barcode reader).
Appearance
The command has the following appearance: