Metrohm tiamo 2.4 (process analysis) - Manual (Page 1479)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 1463
6.9.3.2 Properties - Common variable
Tab: Configuration ▶ Common variables ▶ [Edit] ▶ Properties... ▶ Common varia-
ble - 'Name' ▶ Common variable
Name
Name of common variables.
Entry 50 characters
Type
Selection of the type for a new common variable. For existing common
variables, the type will only be shown; it cannot be edited.
Selection Number | Text | Date/Time
Default value Number
Value
Value of common variables. This value can be assigned in a method by a
CALC command or entered manually. For methods that use the common
variable it is available as the variable 'CV.Name.VAL' or 'CV.Name'
(short form) for calculations.
For type Date/Time variables, the date can be selected by pressing in
the dialog window Select date.
Type = Number
Input range
-1E+99 - 1E+99 (max. 15 places)
Type = Text
Entry
256 characters
Type = Date/Time
Selection
Date selection
Value (unit)
Designation of the unit. If a value is assigned automatically then the unit
will be automatically entered here. It is available for methods that use the
common variable as variable 'CV.Name.UNI' for calculations.
Entry 20 characters
Selection 'empty' | mol/L | mmol/L | µmol/mL | g/L |
mg/L | µg/L | mg/mL | ppm | % | mEq/L | mL |
µg | µS/cm
Default value mol/L
Comment
Possibility to enter remarks about the common variable.