Metrohm tiamo 2.4 (process analysis) - Manual (Page 69)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 General program functions
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 53
Identifica-
tion Description Commands
.VAR Variance of the calculated result
of the command in the selected
unit CAL LOOP pH,
CAL LOOP Conc,
ELT LOOP,
STDADD
.VOL Dosed volume STDADD, ADD,
DOS, LQH
2.4.3.5 Result variables
Dialog window: Formula editor ▶ Variables
Result variables are method-specific and are defined in the CALC com-
mand of the method. The Variables field of the formula editor lists all
Result variables that are available for the current method.
Syntax
'RS.Result name.Variable identification'
Examples: 'RS.RS01.VAL' (='RS.RS01'), 'RS.testTime.UNI'
Method variables can be selected directly in the formula editor under Var-
iables
▶ Result variables so as to avoid syntax errors.
Result variables
Identifi-
cation Description Data
type
.VAL Result value, optional, i.e. 'RS.RS01' =
'RS.RS01.VAL' Number
.ASD Absolute standard deviation for the result Number
.MAX Maximum value of the result Number
.MIN Minimum value of the result Number
.MNV Mean value of the result Number
.NSR Statistics actual counter for the result Number
.NST Statistics setpoint counter for the result Number
.OVF Limit value violation for result; 1 = limit
exceeded, 0 = limit not exceeded Number
.RSD Relative standard deviation for the result Number
.STS Statistics status for the result; 1 = Statistics
on, 0 = Statistics off Number