Metrohm tiamo 2.4 (process analysis) - Manual (Page 1373)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 1357
Electrode type templates
on | off (Default value: on)
Importing saved electrode type templates (see Chapter 6.3.3.6.1, page
1368).
Security settings
on | off (Default value: on)
Importing security settings (see Chapter 6.2.2.1, page 1336).
User administration
on | off (Default value: on)
Importing user administration (see Chapter 6.2.1.1, page 1327).
[OK]
The selected data is imported.
6.3.2 Backing up/restoring
6.3.2.1 Backing up configuration data automatically
Dialog window: Configuration ▶ File ▶ Backup ▶ Automatically ▶ Backup configu-
ration data automatically
Automatic backup
on | off (Default value: off)
If this check box is activated, then the configuration database is saved
automatically to the defined backup directory at the desired time interval.
The entire configuration database (including method groups and meth-
ods) is saved at this time.
If this check box is deactivated, then the following parameters cannot be
edited.
Last backup
Shows date and time of the last configuration data backup.
Next backup
Date and time at which the next backup is to be carried out. opens
the Next backup window to select the date (see Chapter 2.5.1, page
91).
Default value Last backup + 1 month