Metrohm tiamo 2.4 (process analysis) - Manual (Page 1311)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 1295
5.6.11 Process analysis commands
5.6.11.1 Process analysis commands - Overview
Menu item: Method ▶ Insert ▶ New command...
Commands for controllers that are controlled with process analysis
instruments.
The following commands can be selected:
￭ DIGITAL OUT
Actuating digital outputs.
￭ DIGITAL IN
Loading digital inputs.
￭ ANALOG OUT
Outputting results in analog values.
￭ ANALOG IN
Loading analog inputs.
￭ STEPPING MOTOR
Actuating a stepping motor.
￭ PORT
Actuating a multi-port valve.
￭ CONTROL
Controlling Beckhoff instruments.
5.6.11.2 DIGITAL OUT
5.6.11.2.1 DIGITAL OUT - Overview
Dialog window: Method ▶ DIGITAL OUT ▶ Properties... ▶ DIGITAL OUT - 'Com-
mand name'
Devices
This command can be executed with the IO Controller and with the Step-
ping Motor Controller.
Appearance
The command has the following appearance:
Mode of operation
Digital outputs can be actuated two different ways:
￭ One can switch them to activated or deactivated, both with or without
start delay.
￭ The timer function can be used to switch an output to activated for a
certain time after a start delay.