Lenze 9400 Manual - Manual (Page 472)

Accessories (overview)
Accessories for diagnostics
Keypad
9

472 EDS94SPP101 EN 7.1
Comment Meaning Display
A
3
Status of the basic device
 The basic device is ready for operation.
 The basic device is enabled.
 Application in the basic device is stopped.
 Quick stop active
 The basic device is inhibited. The power outputs are inhibited.
 The basic device is ready to start.
 Speed controller 1 in the limitation The drive is torque-controlled.
 Set current limit exceeded in motor or generator
mode
 Pulse inhibit active The power outputs are inhibited.
 System error active
 Error active
 Fault active
 Quick stop by trouble active
 Warning active
A
4
Current function of the right function key
 Confirm and accept changes
 Call up help Is only displayed if a detailed help is available.
 Browse to the next page.
A
5
Current function of the left function key
 Back to the main menu
 Save parameter set in the drive non-volatilely.
 Alter parameter
 Cancel action without accepting the change.
 Browse to the previous page.
 Parameter can only be altered if the application
of the basic device is stopped.
 Parameter can only be altered if the basic device
is inhibited.