Lenze 9400 Manual - Manual (Page 384)

Accessories (overview)
Communication modules
PROFINET
9

384 EDS94SPP101 EN 7.1
External voltage supply

Note!
Always use a separate power supply unit in every control cabinet and safely
separate it according to EN 61800-5-1 (”SELV”/”PELV”) in the case of external
voltage supply and larger distances between the control cabinets.
The external voltage supply of the communication module is required if PROFINET
communication is to remain intact in case the supply of the standard device fails.
If required, feed the communication module with a separate supply voltage via the 2-pin
plug connector (X240).
Designation Explanation
+ External voltage supply
U = 24 V DC (20.4 ... 28.8 V)
I = 140 mA
- Reference potential for external voltage supply
Terminal data
Field Values
Electrical connection 2-pin plug connector with spring connection
Possible connections rigid:
1.5 mm 2 (AWG 16)
flexible:
without wire end ferrule
1.5 mm 2 (AWG 16)
with wire end ferrule, without plastic sleeve
1.5 mm 2 (AWG 16)
with wire end ferrule, with plastic sleeve
1.5 mm 2 (AWG 16)
Stripping length 9 mm