Lenze 9400 Manual - Manual (Page 234)

Power supply modules
Mechanical installation
Important notes
6

234 EDS94SPP101 EN 7.1
6.5 Mechanical installation
6.5.1 Important notes

Note!
The devices must be installed in housings (e.g. control cabinets) to meet
applicable regulations.
6.5.2 Devices in the range 10 ... 36 A (4 ... 18 kW)
Mounting grid
We recommend to provide the mounting plate with a grid pattern of M5 threaded holes
for attaching the devices. This preparation enables easy attachment of the devices, and the
device sizes 1, 2, ... n can thus be mounted directly adjacent to each other.
SSP94PN010
 Mounting with backplane for attaching the power supply module
 Grid hole pattern for installation backplane
 Grid hole pattern for other device sizes or built-on/footprint filters (only Single Drive)
 Cable duct
1
...
3
Device size, mounting holes used