10 terminal assignment, Power supply modules – Lenze 9400 Manual User Manual

Page 253

Text mode
Original mode

Power supply modules

Wiring

Terminal assignment



253

EDS94SPP101 EN 7.1

6.6.10

Terminal assignment

The wiring area of the power terminals is designed for the cables being routed upwards

and/or downwards. Usually the AC mains cables come from above. When filters are used,

the connection cables are fed from below (for filters mounted beside the module) or from

above (for filters mounted above the module). The protection against contact in the cover

can be removed accordingly.
To improve the cable handling, the cable cross-section can also be divided onto two cables.
The ring cable lugs used must not exceed the dimensions specified here.

E94APNE1004 (device size 4, connection M8): max. cable lug width 20 mm

E94APNE2454 (device size 5, connection M10): max. cable lug width 33 mm

S94PN10050

Fig. 6-10

Arrangement of the power connections