Lenze 9400 Manual - Manual (Page 368)

Accessories (overview)
Communication modules
Ethernet interface
9

368 EDS94SPP101 EN 7.1
External voltage supply
E94AZCEH001C

Stop!
The double plug connector terminals are used to conduct the voltage supply.
The total current resulting from the series connection of several devices must
not exceed I
max.
= 10 A per terminal.
Plug connector connection:
Plug connector Explanation
+ Voltage supply
U = 24 V DC (20.4 V - 0 % ... 28.8 V + 0 %)
I = 210 mA
- Reference potential for voltage supply
Screw terminal data
Terminal data
Electrical connection
Plug connector with spring connection
Possible connections rigid: 2.5 mm 2 (AWG 12)
flexible:
without wire end ferrule
2.5 mm 2 (AWG 12)
with wire end ferrule, without plastic sleeve
2.5 mm 2 (AWG 12)
with wire end ferrule, with plastic sleeve
2.5 mm 2 (AWG 12)
Stripping length 10 mm