Lenze 9400 Manual - Manual (Page 421)

Accessories (overview)
Motor holding brake control modules
Motor holding brake control module E94AZHX0051
9

421 EDS94SPP101 EN 7.1
Elements of the motor brake control
Pos. Description
 Nameplate
 Connection of the installation backplane
X107 Connection of supply and brake
Standards
Conformity CE Low-Voltage Directive
Approvals UL (only for use with E94 series) UL508, Industrial Control Equipment, Underwriter
Laboratories (File No. E232497) for USA and
Canada
Operating conditions
The operating conditions correspond to the operating conditions for the standard device
to which the DC-feeding point is connected.
General electrical data
Operating frequency Max. 6/min
Operating times Can be ignored compared to the delay time of the brake.
See documentation of the brake.
Service life > 10 millions of cycles
Protection against
Overload No
Short circuit of the
terminals
Yes
Polarity reversal at the
input
Yes
Insulation 1) Double insulation (EN61800-5-1: V
rated
= 300 V AC),
Separation (UL: V
rated
= 500 V AC)
1) Brake connection against control card of the controller
Rated data
Voltage Current Power Breaking energy
Type U
DC
[V] I
DC
[A] P
DC
[W] E [Ws]
E94AZHX0051 18 ... 30 0.3 ... 2.5 max. 55 max. 5