Lenze 9400 Manual - Manual (Page 444)

Accessories (overview)
Motor holding brake control modules
Motor holding brake control module E94AZHN0025
9

444 EDS94SPP101 EN 7.1
Dimensions
E94AZHN0025_005
All dimensions in millimetres.
Installation steps
DIN rail mounting
1. Position the motor brake control module with the DIN rail adapter  at the bottom
of the DIN rail.
2. Let the motor brake control module snap into the upper DIN rail edge against the
resistance of the spring force.
3. Check that the motor brake control module is securely connected.