Lenze 9400 Manual - Manual (Page 130)

Single-axis controllers
Wiring
Devices in the range 145 ... 695 A (75 ... 370 kW)
4

130 EDS94SPP101 EN 7.1
Mains
Terminal X100 Marking Description
Connection with ring
cable lug for M10
L1
L2
L3
Connection of the mains phases
SSP94KL801
 Connection for the PE conductor on the supply side
Terminal data
Max. conductor cross-section Tightening torque

[mm 2 ] [AWG] [Nm] [lb-in]
Device size 8:
E94ASxE1724
E94ASxE2024
2 x 240 2 x 500 mcm 19 168 WAF 16 Device size 9:
E94ASxE2454
E94ASxE2924
E94ASxE3664
Motor temperature monitoring
Terminal X106 Labelling Description
T1
T2
Motor temperature monitoring with PTC element (type-A sensor,
switching performance according to EN 60947-8 for type-A tripping units)
or thermostat (NC contact).
SSP94X6106
Terminal data
Max. conductor cross-section Tightening torque

[mm 2 ] [AWG] [Nm] [lb-in]
Flexible
2.5 12 0.5 ... 0.6 4.5 ... 6.2
Slot
0.6 x 3.5 With wire end ferrule