Lenze 9400 Manual - Manual (Page 449)

Accessories (overview)
Motor holding brake control modules
Motor holding brake control module E94AZHY0025
9

449 EDS94SPP101 EN 7.1
Permissible operating frequencies
Recommended brake Power Coil: Voltage DC 205 V Permissible operating frequency
Type P [W] L [H] I [A] (20 °C) [1/min]
BFK457-06E
BFK458-06E
20 76 0.10 60
BFK457-08E
BFK458-08E
25 66 0.12 60
BFK457-10E
BFK458-10E
30 85 0.15 60
BFK457-12E
BFK458-12E
40 107 0.20 40
BFK457-14E
BFK458-14E
50 102 0.24 30
BFK457-16E
BFK458-16E
55 127 0.27 20
BFK457-18E
BFK458-18E
85 100 0.41 10
BFK457-20E
BFK458-20E
100 115 0.49 8
BFK457-25E
BFK458-25E
110 134 0.54 6
Safety instructions

During installation the notes given in the documentation for the standard
device must be observed!

Danger!
Dangerous electrical voltage!
Dangerous electrical voltages may be applied to the connections of the brake
switch.
Possible consequences:
ƒ Death or severe injuries when touching the terminals.
Protective measures:
ƒ Disconnect the standard device and the brake switch from the mains before
carrying out any operations.
ƒ Check that all power terminals are deenergised.