beautypg.com

6 isolated +24 v (dc) supply, Caution – INFICON Cygnus 2 Thin Film Deposition Controller User Manual

Page 50

background image

2 - 12

IP

N 07

4-

54

5-

P1

E

Cygnus 2 Operating Manual

2.3.2.6 Isolated +24 V (dc) Supply

An isolated +24 V (dc) power supply is available on a 9-pin D-Sub connector on the
Cygnus 2 back panel. This supply is rated for 1.75 Amps maximum.

The pin assignments for this connector are shown in

Table 2-5

.

CAUTION

Both the isolated 24 V (dc) supply and the RS-232C
remote communications port use a 9-pin D-sub
connector. Care must be taken not to inadvertently
connect the RS-232C remote communications cable to
the 24 V (dc) supply connector. Also, care must be taken
not to inadvertently connect the 24 V (dc) supply cable to
the RS-232C remote communications connector.

Table 2-5 +24 V (dc) pin connections

Pin Function

1

Return

2

Return

3

Return

4

Not Connected

5

Not Connected

6

+24 Volts

7

+24 Volts

8

+24 Volts

9

Not Connected